Outboard Racing Hardware
To order please email Lee at machinedcomp@canby.com
12 " Aluminum Steering Wheel
All Aluminum with 2 " offset
Very Light, 1.2 Lbs. Black Powder coat finish.
0 Degree Coaming Pulley Set
10 Degree Coaming Pulley Set
0 Degree Runabout Coaming Pully Set
Steering Bar Pulley Set
3 inch Steering Hub Assembly
5 inch Steering Hub Assembly
Steering Cable
Galvanized Steel Cable with Black Nylon coating.
Tie back Set
Cable Clamps
Fits 3/16 Diameter Cable or Rope.
Wire Clamps
Fits 1/16-3/32 Diameter Wire.
Ideal for Pipe Cables.
Transom Handle Set
Transom Tie Down Set
Uses 5/16-18 Thread Bolts
Transom Pad Set
Bow Eye
Hand Throttle
3 Position Locking Hand Throttle.
Clear Anodized for durability. Cable Ferrule Included.
Throttle Cable Ferrule
.375 Diameter Stainless Steel Cable End.
Includes (2) 1/4-20 Set Screws.
Throttle Cable
9/32 Outside Diameter, with Teflon Liner.
1/16 Diameter Stainless Steel wire
Aluminum Fuel Cap/Filler Neck
O-Ring Seal
3 inch Steering Extension
5 inch Steering Extension
Steering Stabilizer
Kit Includes: Bilstein Dampner, Mounting Bracket and all Necessary Fasteners.
Prop Wrench
3 and 4 Blade Configuration
Magnetic Prop Balancer
Balance Stock, Mod, Pro Props up to 7.5 Inches in diameter.
Large Angle Fin Bracket
C and D Class Hydros
Small Angle Fin Bracket
A, B and J Class Hydros
Large Turn FIn
C, D and up to 1100cc Hydro's
Measures: .250 x 3.50 x 10.00
Small Turn FIn
A, B and J Hydro's
Measures: .188 x 3.00 x 8.00
Standard Hydro Turn Fin Bracket
Up to 1100 cc Hydros
Laydown Hand Throttle
Vacate Valve
One Way Dain Valve. Requires 7/8 Diameter Hole.
Expanding Drain Plug
Fits 5/8 Diameter Hole.
Drain Plug Sleeve
5/8 Bore. Requires 3/4 Dia. Hole.
Yamato Prop Shaft 80/102
9/16 Diameter
Yamato Prop Shaft 302/321
9/16 Diameter
Yamato Prop Shaft Loc-Nut
9/16 -18 Loc-Nut Grade 2 Zinc Plated
Yamato Prop Shaft Lock Washer
Fits 9/16 Diameter Prop Shaft
Yamato Spark Plug Adapters
14mm to 18mm Spark Plug Adapter. Machined to accommodate thermal couplers.
Mikuni/DelLorto Carb Cable Guide
90 Degree Elbo, Low Profile .700 Tall
Mikuni/DelLorto Carb Cable
.048 Dia. Cable, Factory Lead End. 80" long
Carb Cable
5MM (.197 Dia.) Outside Diameter, with Teflon Liner.
Denso Iridium Racing Spark Plug
IW34
Mychron 2 Piece Gauge Bracket
Extra Dash Mount $25
Cool Tool Water Pick Up
#10 Plastic Finish Washer
Ideal for windshields
#10 Aluminum Finish Washer
Ideal for Windshields.
1/4 Conical Aluminum Washer
Available in Black Anodize or Natural Finish.
4 Wire Universal Kill Switch
Can be Wired to Make or Break a Circuit.
Yamato Engines Require (2) Switches.
Kill Switch Flange Nut
For 3/8 through 1/2 Inch Thick Cockpit Sides.
Kill Switch Bracket
Vertical or Horizontal Mount Inside your Cockpit.
44 Merc Throttle Bracket
Bolts to the front of the carbs.
Gearcase trailer brackets
Fits Konny, Rossi, VRP and stock Yamato gearcases.
12 MM Drive Shaft Coupling
.875 Diameter x 1.750 Long 416 SS
Works with stock Yamato engines.
UHMW Plastic Powerhead Gasket
.087 Thick Reusable Gasket fits VRP, Rossi 125cc 250cc 350cc Engines. Absorbs Vibration and Eliminates Aluminum Erosion
Coleman Electric Starter for Outboards
Includes 1/2 Square Drive Coupler.
Due to Shipping Restrictions, Battery is Not Included. Uses a 12V, Sealed Lead Acid or Lithium-ion Battery.
Yamato Electric Starter Adapter
Machined with 1/2 Square Drive. Fits Coleman and BBT Electric Starters. Works on Yamato 80, 102, 302, 321 Engines. Locates on Factory Rope Slots. No Additional Stress on The Crankshaft.
EVS R2 RACE Collar
Foam Neck Brace. Contoured to Fit Over Your Shoulders. While Maintaining Mobility.
Machined Components T-Shirt
Small, Medium, Large
Machined Components T-Shirt
XL, 2XL
For questions or orders please contact Lee at Machinedcomp@canby.com